Turbocharger 8200069567 720244-0001

The Turbocharger 8200069567 (manufacturer OE reference 720244-0001) is a robust, high-performance turbocharger designed 

specifically for the Nissan Commercial Interstar X70 equipped with the G9T 722 engine. Engineered to meet demanding commercial vehicle requirements, 

this turbocharger balances durability, responsiveness, and efficiency to deliver reliable boost performance across a wide range of operating conditions.

 The following introduction outlines the product’s core design features, technical advantages, vehicle fitment, installation and maintenance guidance,

 performance considerations, and the benefits it brings to fleet and independent operators.

Product overview

At its core, the 8200069567 turbocharger is built around a precision-balanced CHRA (center housing rotating assembly), 

matched compressor and turbine housings, and bearings designed for long service life under heavy-duty conditions. 

The unit is intended as a direct fit replacement for the factory turbo fitted to the G9T 722 diesel engine, ensuring compatibility with existing mounting points, 

oil and coolant lines, and actuator linkages. Whether used as an OEM-equivalent spare part or as a high-quality aftermarket replacement, 

this turbocharger is specified to restore or improve the engine’s forced-induction characteristics with minimal modification.

Key features and design highlights

1. Direct-fit replacement — The turbocharger uses OE-equivalent flanges, stud patterns, and actuator mounts,

2. allowing straightforward integration into the Interstar X70 without the need for custom adapters.

3. Balanced CHRA — The rotor assembly undergoes dynamic balancing during manufacture, reducing vibration and extending bearing life.

4. This is critical for diesel commercial engines that often operate for long hours at variable loads.

5. High-strength materials — Turbine wheels and housings are produced from heat-resistant alloys

6. capable of withstanding elevated exhaust temperatures typical of heavy-load duty cycles.

7. Wastegate or VNT compatibility — Depending on the specific variant, the unit either incorporates a precisely calibrated wastegate

8. actuator or a variable geometry mechanism to manage boost pressure across the RPM range, improving drivability and fuel economy.

9. Improved sealing and filtration — Enhanced oil seals and optimized internal oil channels reduce the risk of leakage and improve lubrication,

10. while a correct operating oil feed and return procedure helps prolong turbo life.

11. Quality-controlled manufacturing — The turbocharger is produced under controlled manufacturing processes with

12. olerance checks and end-of-line testing to deliver consistent performance from unit to unit.

Vehicle fitment and compatibility

This turbocharger is intended for the Nissan Commercial Interstar X70 series fitted with the G9T 722 engine family. 

It replaces the original unit and is suitable for use in light- to medium-duty commercial configurations where the Interstar is employed as cargo vans, 

chassis cabs, or as platform vehicles. When replacing a turbo, confirm the part numbers and actuator type on the original unit, as small differences in vacuum lines, 

actuator strokes, or mounting brackets can affect fitment. Always compare the turbine housing outlet, compressor inlet, and oil feed/return positions before installation.

Performance and operational benefits

1. Restored power and torque — A correctly fitted turbocharger brings the engine back to its designed boost levels,

2. restoring low-end torque for easier load carrying and improved driveability at urban speeds.

3. Fuel efficiency — By optimizing air intake and improving combustion efficiency, the turbocharger helps the engine achieve better fuel economy under comparable loads.

4. Reliability under load — Heavy-duty materials and proper balancing reduce the risk of premature failure

5. when the vehicle operates for extended periods with heavy payloads.

6. Smoother throttle response — Especially for units with a variable geometry mechanism or well-calibrated wastegate,

7. throttle response becomes more linear, reducing turbo lag and improving driver control.

Installation guidance (summary)

Installing a turbocharger on a diesel commercial vehicle requires mechanical skill and adherence to safety and cleanliness standards. 

Below are summarized steps and important precautions:

1. Pre-installation checks — Inspect the replacement turbocharger for any shipping damage. Verify the part number, actuator type,

2. and flange orientation match the original.

1. Cleanliness — Ensure the intake, exhaust manifold, oil feed and return lines, and all mating surfaces are free of debris.

2. Any foreign object entering the turbo or engine can cause catastrophic damage.

3. Oil supply — Prime the turbo oil supply by pre-filling the oil inlet or by cranking the engine with the ignition disabled to circulate oil before the first start.

4. This reduces dry-start wear on the bearings.

5. Gaskets and seals — Always use new gaskets, seals, and, where applicable, a new oil return gasket.

6. Torque bolts to the manufacturer’s specifications and follow correct sequences to avoid warping flanges.

7. Actuator and linkage calibration — Verify that the actuator (wastegate or VNT control) linkage operates freely and is correctly adjusted. Incorrect adjustment can lead to overboost or insufficient boost.

8. Initial run-in and checks — After installation, run the engine at idle to check for leaks and confirm proper oil pressure to the turbo.

9. Allow the turbo to cool down properly after heavy use by idling the engine for a short period before shutdown.

Maintenance recommendations

To maximize service life of the 8200069567 turbocharger, adhere to routine maintenance schedules and best practices:

• Regular oil and filter changes — Use manufacturer-recommended grade lubricants and replace filters at prescribed intervals. Contaminated oil shortens bearing life.

• Air filter maintenance — Maintain clean intake filtration to prevent abrasive particles from entering the compressor.

• Inspect oil lines — Periodically check oil feed and return lines for blockages, leaks, or deterioration.

• Monitor engine health — Excessive smoke, loss of power, or unusual noises from the turbo area can indicate internal wear or seal failure and should be diagnosed promptly.

Applications and target users

This turbocharger is ideal for fleet operators, mechanics, and OEM replacement programs where maintaining uptime and predictable 

performance of Nissan Interstar commercial vehicles is essential. Independent garages and parts distributors will also value the unit for its direct-fit characteristics and the ability to restore factory-like performance.

Conclusion

The Turbocharger 8200069567 (720244-0001) is a purpose-built replacement turbo designed to meet the rigorous

 demands of the Nissan Interstar X70 with the G9T 722 engine. Combining OE-fitment accuracy with robust materials, balanced assembly,

 and careful engineering, this turbocharger restores engine power, improves fuel economy, and provides dependable performance under commercial operating conditions. 

When installed and maintained according to professional guidelines, it offers a cost-effective way to extend the operational life of vehicles and reduce fleet downtime.